ARDEX WA

Colours:

• anthracite
• grey
• silver grey
• white

Mixing ratio:

Is specified by the container

Material required for grouting approx.:

Tile size	Joint width	Joint depth	Consumption
5 x 5 cm	3 mm	5 mm	0.90 kg/m²
10 x 10 cm	3 mm	5 mm	0.45 kg/m²
20 x 20 cm	3 mm	5 mm	0.25 kg/m²
11,5 x 24 cm	3 mm	5 mm	0.30 kg/m²
30 x 30 cm	3 mm	5 mm	0.15 kg/m²

Note:

Losses due to excess material can amount to 0.10 to 0.20 kg/m² depending on the type of tile and working method

Fresh weight approx.:

1,50 kg/l

Processing time approx.:

60 Minute(s)

Insertion time (EN 1346) approx.:

30 Minutes

Correction time approx.:

30 Minutes

Can be walked on after approx.:

12 Hours with sufficient hardening

Application Ambient conditions:

+20°C

Adhesive tensile strength approx.:

Ambient condition	Bond strength	Time
Dry/wet storage	2.5 N/mm²	After 28 days

Bending tensile strength approx.:

Time	Bending tensile strength approx.
After 28 days	30 N/mm²

Compressive strength approx.:

Time	Compressive strength of approx.
After 28 days	60 N/mm²

Labelling according to GHS/CLP:

Labelling according to GHS/CLP	Component
GHS07 "irritant", GHS09 "harmful to the environment", signal word: Caution	Resin
GHS05 "corrosive", GHS07 "irritant", Signal word: Danger	Hardener

Labelling according to ADR:

Component	Labelling according to ADR
Resin	Class 9, UN 3082, III, environmentally hazardous substance, liquid, n.o.s.
Hardener	Class 8, UN 2735, III, amines, liquid, corrosive, n.o.s.

Packaging:

Combination container consisting of bucket with 3 kg ARDEX WA master paste and insert can with 1 kg ARDEX WA hardener.

Storage:

Can be stored in dry rooms for approx. 18 months in the original sealed container. Store buckets vertically, do not tilt. Stiffening of the pastes during storage has no effect on the quality of ARDEX WA.